Did you know that you can power on the Xbox One even when you don’t have the special brick controller necessary to turn it on? It’s true, and if your Xbox One is giving you trouble, it might come in handy. Here are some reasons why your Xbox One may not be turned on: The power cord is disconnected or broken. Your console has overheated from extended use or is being placed in a confined space without adequate ventilation. The power supply is unplugged. There’s a broken component inside the console. A nearby lightning strike damaged the device or disrupted its network connection with other devices in your home. In this article, we’ll show you how to power on the Xbox One even if you don’t have the controller that normally powers it on. Read on and get back up and running again as soon as possible!
How To Power Xbox One Without A Brick
1. Check the power cord
The first thing you should do if you’re experiencing trouble with your console is to check the power cord. The Xbox One has two power cords: a standard one and an extra-long one, which is designed to accommodate the length of the additional components that connect to it. The official Xbox One power cord is designed to be used only with the console itself, while the extra-long cord can be used for other devices that need extra cable length. Make sure you use only one type of cable at a time—and never switch between them while your Xbox One is running! If you’ve disconnected or damaged either of these cords, you’ll need to get a replacement before you can turn on your Xbox One again.
2. Check for broken components inside the console
If neither problem above has resolved your issue, it’s time to look inside your Xbox One and see what’s broken. First, locate the small screw on top of the device that holds the power button in place. Next, unscrew the screw and pull the power button out of its socket. Then, remove the three screws that are holding the inside panel of your Xbox One in place, and carefully lift it up toward you.
3. Check for a broken component inside the console
Once you have taken out the interior panel from your Xbox One, look around for any loose or broken components. If there is a loose component, it could be causing an issue with your console’s functionality. Try to identify what it is by using a flashlight to check for any metal pieces or other small components that may have fallen out of place during disassembly. If you don’t find anything wrong with your device, but you still can’t turn it on when nothing else has worked, then it’s time to get some professional help! Keep reading to learn how to get help with your Xbox One!
4. Find the power supply
Once you’ve removed the panel, use a Phillips-head screwdriver to remove the three screws that are holding down the power supply. Then, flip the power supply upside down and remove it from your Xbox One. You can now see where all of your cables connect to your console, including the main one (the one with a white stripe) which powers on and off all of the other USB devices in your home. If any of these cables are broken or damaged, you’ll need to replace them before you can get back up and running again!
5. Check for a loose component inside your Xbox One
If none of these steps have worked to turn on your Xbox One, it may be time to check for a loose component inside it—a component that’s causing some sort of problem with its connectivity or operation. The first step is to open up your console and locate the battery compartment (the round Xbox One in place, and slide it to the side.
6. Check if the power supply is unplugged
Most likely, your issue is related to the power cord or the console itself, but it’s possible that something else has happened as well. If you’re sure the power cord is plugged in and the Xbox One still won’t turn on, check to make sure that the power supply isn’t unplugged. There are two connections on the back of your Xbox One that are used for this; look for red lights that indicate whether a connection has been made or not. If these lights aren’t lit up, then you’ll need to get a replacement power supply before you can turn on your Xbox again.
What Should I Do If My Xbox One Doesn’t Turn On?
- Plug in the power cord and make sure it’s fully seated.
- Turn on your Xbox One by pressing the power button on the console.
- Wait for a few seconds to see if it turns on or not.
- If it doesn’t turn on, try turning it back off and then back on again so that you can press the power button again to see if it works now. If you’re having trouble getting your Xbox One turned back on, try taking out the power cord and plugging it back in as shown here: Follow these steps to get your Xbox One turned back. Plug in the power cord and make sure it’s fully seated. Turn on your Xbox One by pressing the power button on the console. Wait for a few seconds to see if it turns on or not.4. If it doesn’t turn on, try turning it back off and then back on again so that you can press the power button again to see if it works now.
How Do I Fix An Xbox One Power Brick Problem?
- Power down the Xbox One by holding the power button for 10 seconds.
- Disconnect all power cords from the unit and all other devices that may be connected to it.
- Unplug the power cord and remove any external cables or unneeded accessories that may be connected to it.
- Power up your Xbox One again by plugging in the power cord, if applicable, and then pressing the power button on your controller or on the console itself. Read More: How to Reset an Xbox One without a Microsoft Account.
The Xbox One is a fantastic console, but just like any piece of technology, it can fail. Fortunately, there are several ways to power it on even when the controller is broken or missing. When your Xbox One won’t turn on, the first thing to do is check the controller. If the controller is broken, you can use another controller, a charging cable, or even only the controller to turn on your console. While the Xbox One is a bit finicky about how it gets going, the good news is that this won’t happen often. Hopefully, when your Xbox One won’t turn on, one of these tricks will get it going again!