Though your phone probably spends more time on a desk than in your hand, the fact that it’s a portable device means that you may need to access the charging port from time to time. Whether it’s cleaning the port or transferring data between devices, having access to your phone’s charging port is essential for day-to-day use. However, there are some instances where this tiny hole can seem like a major inconvenience. If you find yourself with liquid in your charging port, don’t panic! These tips will help prevent long-term damage and get you back up and running as quickly as possible. Read on to learn how you can get liquid out of your mobile device’s charging port.
How To Get Liquid Out Of A Charging Port?
- You will need a paper clip, a toothpick, and a piece of cloth.
- Take the paper clip and insert it into the charging port.
- Push the clip in until it hits the bottom of the phone’s battery.
- Then, take your toothpick and press it against one of the contacts on the bottom of your phone’s battery (the one with two small holes in it).
- Wrap some of your handkerchiefs around your finger and use them to wipe down any excess liquid that may have collected on top of your phone’s battery casing or underneath your finger while pushing down on the toothpick to put pressure onto its contact point (make sure not to get any liquid on your fingernail).
- Then, take off all that extra cloth you wrapped around that finger, and proceed to wipe down all three contact points on the bottom of your phone’s battery again with another piece of cloth. Do this until you no longer see any liquid collecting on top of or under your finger when you push down on one contact point with a toothpick while wiping away excess liquid from another contact point with a piece of cloth (do not push too hard! This is an important step because too much pressure can damage/break/crack some plastic parts inside that could lead to more problems).
- After all three contacts are wiped clean, remove all excess cloth from around those contacts again and reinsert them into their respective slots at the bottom of your phone’s battery.
- Reinsert your phone’s battery into its casing, and then close the lid of your phone (if you have a flip case that covers the charging port, make sure you cover it as well).
- Put your phone onto its charger, and let it charge for at least ten minutes before removing it again (this will allow some of the liquid inside to seep out through the bottom ports on your phone).
- After ten minutes have passed, remove your phone from its charger and open up the port where you inserted that paper clip earlier to see if any liquid is still there (if so, repeat step 9 until no more liquid is coming out).
- If all goes well, you are now done! Congratulations!
What To Do If Liquid Gets In Your Charging Port?
- Soak your phone in a bowl of hot water for a few minutes. (This will soften any hardened build-up that may have formed inside the port after so many years without use.)
- Take apart your charging port and remove any debris that may have gotten lodged inside it during the years of not being used.
- Take another paper clip (or toothpick), and press one end into one of the contacts on your battery, while pushing down on the other end against the bottom of the charging port to get some liquid out from inside your charging port.
- Repeat step 3 until no more liquid comes out from inside your charging port when you push down on one contact with a paper clip or toothpick and wipe away excess liquid from another contact with a piece of cloth (do not push too hard! This is an important step because too much pressure can damage/break/crack some plastic parts inside that could lead to more problems).
- After all three contacts are wiped clean, remove all excess cloth from around those contacts again and reinsert them into their respective slots at the bottom of your phone’s battery.
- Reinsert your phone’s battery into its casing, and then close the lid of your phone (if you have a flip case that covers the charging port, make sure you cover it as well).
- Put your phone onto its charger, and let it charge for at least ten minutes before removing it again (this will allow some of the liquid inside to seep out through the bottom ports on your phone).
- If all goes well, you are now done! Congratulations!
I hope this helps you out with your next device. If you have any questions about this process or have any tips/tricks/advice for fellow readers, please leave a comment below!
Tips To get Liquid Out Of A Charging Port
Dry the port with a paper towel
If you’re in a situation where you can’t remove the charging cord, you can use a paper towel to dry out the inside of the port. While this may not be ideal, it’s the only option available to you in certain situations. Begin by wrapping the paper towel around your fingers and prying off the backplate of the phone. You may want to use a spudger for added precision. Once you’ve removed the backplate, you should be able to see the charging port. Next, wad up the paper towel and gently press it into the port. Continue to push it into the port until all the liquid is out. Make sure you’re careful not to push it too far, as you don’t want to push it into the phone’s circuitry. Once the liquid is out of the port, you can put the phone back together and plug it in to charge.
Use isopropyl alcohol
If you don’t have paper towels on hand or you’re dealing with a lot of liquid, isopropyl alcohol is another option that can help you get it out. To use this method, you’ll first want to remove the back plate and the battery. Once you have the phone open, you can pour the alcohol into the port. Let it sit for about five minutes, and then use a cotton swab to squeeze out the liquid. While this method is a bit more involved, it’s more effective at removing a larger amount of liquid. It’s also a better option when dealing with more viscous liquids, such as honey or syrup.
Try vacuuming
Another option that can help you remove large amounts of liquid from a charging port is to vacuum it out. This method can be a bit more involved, but it can also be effective in removing liquid from a charging port. First, you’ll want to remove the back plate and the battery. Then, use a syringe to suck out as much liquid as you can. Next, place a small number of paper towels into the port and vacuum it out. If you don’t have a vacuum, you can use a can of compressed air to remove the excess liquid from the port.
Final Words
If you find yourself in a situation where liquid gets into your phone’s charging port, don’t panic. There are plenty of ways to remove the liquid and get back to using your device as quickly as possible. You can also reduce your chances of getting liquid in your charging port by putting your phone in a case that covers the port. If you have a few extra minutes, you can also clean the charging port with a toothbrush and some rubbing alcohol. This can help you avoid having to deal with liquid in the port in the first place.
